The Two Rock Custom Reverb Signature V3 is a versatile two channel amplifier from boutique makers Two Rock. The Custom Reverb has always been a culmination of everything Two Rock creators Bill & Joe have learned since day one. Version 3 adds a new loop and Contour controls to this classic design.
The Custom Reverb V3 has two distinct channels Clean and Lead, the Clean Channel is the classic pure Two Rock tone with endless depth and headroom. If you are looking for the famous John Mayer clean tone - this is it. The Lead channel has a superb warmth to it and the various controls on the V3 allow you to tweak and refine the sound to your perfect tone.
Two Rock use carefully selected components and a hand built approach to craft some of the finest quality amplifiers we have come across. Just taking a peak inside the chassis is a lesson in what true craftsmanship is.
The Custom Reverb V3 has an extensive range of controls giving you total control over it superb tone. The Custom Reverb V3 is an amp you can really sit down with and spend hours discovering new tones and subtle variations but the core sound is always pure and true to you.
Custom Reverb Signature V3 Controls
Treble Control - Adjusts the high frequency response. In the full counter-clockwise position, high frequencies are bypassed to ground. In the full clockwise position, high frequencies are allowed to pass to the next gain stage.
Bass Control - Adjusts the bass response. In the full counter-clockwise position, low frequencies are cut. In addition, the response of the treble and mid-range controls is greatly reduced. In the full counter-clockwise position, low frequencies are allowed to pass to the next gain stage.
Mid Switch - Boosts the mid range frequency response
Deep Switch - This is a low frequency contour switch changing the low and low mid response.
Input Gain - Adjusts the overall gain of the amplifier.
Clean Channel Master Volume - Adjusts the output level of the clean channel
Bright Switch - Boosts the high frequency response
EQ 1 / EQ 2 Switch - Allows you to choose between two completely different EQ settings.
EQ 1 - This is a lower gain setting, this is ideal for the classic Two Rock pure clean tone with plenty of headroom.
EQ 2 - This is a higher gain setting allowing a greater signal level to pass to the lead channel, perfect for slightly distorted tone in Clean mode and more gain in Lead mode.
Lead Gain - Adjusts the input level ( gain ) of the lead channel
Lead Master - Adjusts the output level of the lead channel
Lead Channel Switch - The Lead channel adds extra gain stages to the signal and enables the Lead gain and Lead Master controls.
Bypass Switch - This switch bypasses the tone controls, increasing both level and mid-range response.
Reverb - The front panel reverb is the return, or mix, control. Use in conjunction with the rear mounted Reverb Drive control
Contour Control - This is an active wide band sweep. Perfect for adjusting for different room acoustics or styles of guitar.
Power Switch (On Rear) - This switches the Custom Reverb from full power to half power.
Lead Contour (On Rear) - Contour Control just for the lead channel.
Effects Return Level (On Rear) - This Control has a pull-bright function. The Loop is active in the circuit even with no effects connected, so the level control acts as a master volume. The pull-bright features is useful when playing at low volumes ( a low fx control setting) o when a large number of outboard effects are used in the loop, which sometimes causes high frequency insertion loss.
Reverb Send (On Rear) - The reverb drive control adjusts the signal level applied to the reverb unit. Low settings with provide a smooth, short decay effect, simulating small to medium rooms. Higher settings will increase the decay time. At maximum clockwise rotation, an extremely wet reverb effects can be created. This control is used in conjunction with the front panel Return Control.
Two Channels - Lead & Clean
2 Contour Controls - Lead & Clean
New Reverb for better loop function
Full / Half Power Switch
Two-Rock Boutique Amplifiers is a collaboration of Bill Krinard and Joe Mloganoski who together create top of the line hand built guitar amplifiers. Utilising the best components and custom designed speakers Two-Rock’s amplifiers produce the purest tone available today.